How to Fix Squeaky Floorboards in Your Home


If you’re wondering how to fix squeaky floorboarding in your home, you can try a few methods. These include the Squeeeeek No More system, the Wood shim system, and using talcum or baby powder to soften the squeaks.

Squeegee No More system

The Squeeeeek No More system is an easy-to-install, DIY system that uses a unique method to reinforce floor gaps from above. It uses specially designed screws with a tear-off head and is applied through the carpet to fasten the subfloor to the joists. The kit has a tripod tool, a driver bit, and a stud finder. The system is designed to permanently fix the squeak while preventing the floor from becoming noisy again.

The Squeeeeek No More system works with various flooring materials, including carpeting and linoleum tiles. If you have hardwood floorboards, the wood filler can be applied to cover the screw holes. Linoleum tiles aren’t as durable and will not completely hide the screw holes, but area rugs and furniture can help conceal them.

Wood shims

A standard solution to squeaky floorboards is to place wood shims under the floorboards. Shims are small, thin wedges of wood that you can buy at any hardware store or lumber yard. They can be wedged lightly, but be sure not to put too much pressure on them, as this may cause the gap to widen. You can also apply construction adhesive to fill any irregularities between the wood surfaces.

Shims are an effective way to fill the space between floorboards and help prevent floorboards from moving. The shims should be placed on both sides of the floorboards to prevent a noticeable “hump.”

Squeak-Ender system

The Squeak-Ender system is a cleverly designed piece of hardware for fixing squeaky floorboards. It consists of a steel bracket and threaded rod that attaches to joists. It is easy to install. Simply slide the bracket over the rod and hook it onto the joist. Once mounted, tighten the bolt with a wrench.

Some quick and dirty solutions to fixing squeaky floorboards include shims and pulling down floorboards. One product that works to stop squeaks is the Squeak-Ender system, available from your local Home Depot.

Using talcum or baby powder to soften squeaks

Applying baby powder or talcum powder to squeaky floorboards is an easy way to lessen the squeak. It acts as a lubricant, dampening the friction that causes floorboards to squeak. However, this method is only effective if the problem is relatively minor. It is also a temporary fix, so you should be prepared to replace the floorboards if it is not practical.

Although talcum powder does work, there are better and more effective solutions. These include applying the baby powder directly onto the floorboards and forcing it into the seams. While this method is only temporary, it has the advantage of keeping squeaks to a minimum and helps prevent floorboards from rubbing against each other.

Using Squeeeeek No More system on the carpet

The Squeeeeek No More system is an excellent way to fix squeaky floorboard noises. It can be used on different types of flooring, but it works best with carpeting and rugs. The kit also includes specially designed screws with a tear-off head, inserted through the carpeting and fastened to the subfloor to the joists.

The system works by stopping friction, which is the reason for the squeak. Stopping friction is done by physically squeezing two different elements, one of which cannot move and the other is unable to move. Some basic supplies are needed to perform this repair, but not all homeowners will have them. Before you begin, it is essential to read the instructions to determine what is needed carefully. This repair is also easier to complete if you have access to the underside of the flooring.

Using Squeeeeek No More system on linoleum tiles

The Squeeeeek No More system can be used to fix squeaky floorboard problems in both wood and linoleum floors. It works by reinforcing floor gaps from the top. The kit includes counter-snap screws with a wax coating, a tripod tool, a driver bit, and a stud finder. The tripod tool drives the counter-snap screws through the subfloor and floor covering. The screw shafts are pre-scored at one inch from the top, and when driven through the tripod tool, they snap off the subfloor’s surface. This leaves the threaded portion of the screw in the subfloor.

The Squeeeeek No More system works on various floorboards and materials, although it is most effective on carpeting. In the case of wood floors, wood filler or vinyl sheeting can be applied to the holes. The vinyl sheet will expand and hide the screwholes partially. Linoleum tiles, on the other hand, will not hide screw holes completely. In such cases, a piece of area rug or other furniture can be used to hide the holes.